How to change Zong bolt password

How to change Zong bolt password
The process for changing the Zong Zing on Lenovo K5 Note and other phones is same as previous Lenovo K5 series phones. It is really not hard for the user to change the password of Zong 4g. Reset Zong 4G WiFi Device.
Here, we have shown the step by step guide of changing Zong Zing password.

Method 1- Easy Installation

Download the Zong Zing OTA package and open it. Now click on the Apply button. The phone will restart.
If the Samsung phone will automatically reboot after some time.

Method 2- Manual Installation

You can manually flash the Zong Zing OTA file with stock firmware.
Start by powering off the phone.
Turn off the phone, hold Volume Up + Home buttons at the same time.
In case, you cannot see the Reboot Menu, it means that the phone is already rooted and rooted method is not working.
Select “Yes” when you are asked whether you want to flash the stock firmware.
Select “Okay” when the phone will restart.
The Zong Zing OTA will automatically be flashed to your device.
If you want to flash a custom recovery like CWM, TWRP recovery, you will need to unlock the bootloader in case you are rooted with stock recovery. Zong 4g new version is very easy new technology very interested.
You can unlock the bootloader by following the steps below.
Go to Settings > About phone > System information.
Under the System information section, click on the Build number seven times. After that, wait for three or four seconds and then release the key.
The bootloader will now be unlocked.
In order to perform the restart, go to Settings > Lock screen and security > Operation pattern.
Select the “Reboot” option.
Now restart the phone.
How to change Zong Zing Bolt password
Using Zong Zing MIMO Password
By entering the Zong Zing MIMO passcode, the user can manage the signal strength and other settings on the Lenovo K5 Note Zong Zing. To enter the password, go to Settings>Accessories>Specified on the device>Security and reset password.

Quick boot menu of Zong Zing

By entering the Zong Zing Bolt password, the user can boot the phone normally. To enter the password, go to Settings > About phone > System information > Bootloader version.
By entering the Zong Zing Bolt password, the user can save the password for Zong Zing.

You May Also Like

About the Author: Abhay Choubey

Leave a Reply

Your email address will not be published. Required fields are marked *